Do I Have the Original Load Screens or the New Load Screens?

In March 2026, even after you update Transflo Mobile+ to the latest 7.x release, your fleet might still be configured to use the older original load screens. At some point in 2026, all fleets will eventually migrate to the new Transflo User Workflow screens (the new and improved load screens).

As a driver, you might be wondering How do I know if my app is showing me the old original load screens or the new load screens?

 

 

 

  • The original load screens showed a Stops button. The new load screens show a Steps button.

    The new Steps screen tells you exactly step-by-step what you need to do next. It might be a step to drive to your next stop, but it could also be any other step for your load or the next step on your LTL route. So a Stops button means you have the older but still working screens, and a Steps button means your fleet was already updated to the new screens.

  • The original loads showed the loads by status listed top-to-bottom. The new loads features allow you to swipe through the load status categories from left-to-right.

 

Those are just two quick easy ways to tell whether your fleet is using the legacy classic loads (also known as Loads 1.0) or the new user workflows (also known as Loads 2.0). The new load features from Transflo offer hundreds of other time-saving enhancements, as you'll soon discover!

As a driver, there is nothing you need to do. When your fleet goes to the new screens, you will be given time to finish your final load in the old screens and then your app will update itself and you will start your new loads on the fresh new screens.